Solair World

Why Does My Solar Inverter Keep Beeping?

Facebook
Twitter
LinkedIn
If you use our links to purchase something, we may earn a commission. Learn more.

If your solar inverter keeps beeping, you are most likely hoping to figure out how to fix it. After all, the sound can be annoying, and one’s peace of mind is paramount.

On the other hand, there’s the thought of the solar inverter having an issue. That’s because where there is fire, there is smoke, and beeping is enough reason to cause concern.

So, why does my solar inverter keep beeping? Should I worry about this issue even for a second?

Regardless, are there ways of making the annoying sound go away? Here is a discussion that answers these questions and teaches you much more about the issue. Check it out!

Why is My Solar Inverter Beeping?

There are various reasons why your solar inverter keeps beeping. They include the following;

Low Voltage

Expect a pattern if your solar inverter keeps beeping because of low voltage. That’s because the beep occurs after every 5 minutes under these circumstances.

The solution to such an issue will be reducing the appliances drawing power from the solar system. If that’s not enough, consider switching it off for some time.

Self-Test Failure

One must admit that this reason isn’t common among solar inverters. It is slim, but there are chances of the inverter beeping as soon as this test fails.

The purpose of the test is to monitor its battery’s performance. This integrity check occurs after 2 weeks.

So, if your solar inverter fails this test, the battery has an issue. You must replace it as soon as possible since its end is approaching.

In most cases, the inverter starts once the battery is only  2 to 4 weeks away from its end. Therefore, ensure that you replace it within this window to avoid inconvenience.

Overload Condition

If you overload the capacity of your solar inverter, it could see the electronic equipment starts beeping. It is a way of alarming you that you haven’t done right by it.

Solving the beeping issue means ensuring the load doesn’t exceed the capacity. It is as simple as removing the extra equipment, and you should start with the non-essential devices.

Alternatively, identify the power your devices need and buy a solar inverter with a capacity that matches those needs. So, paying attention to the capacity and size of a solar inverter is essential when buying one.

The Inverter Battery is Low

A beep from your solar inverter could notify you that its battery is low. A low battery means the inverter is bound to shut down after a while if you don’t fix it.

Fortunately, the fix is simple and doesn’t need a professional. As soon as you charge the battery, the sound will go away if that’s why it had occurred, to begin with.

You are most likely wondering why the inverter shuts down automatically due to the low battery. It is a protective mechanism that ensures the inverter’s batteries don’t discharge too much.

The inverter will usually shut down around 2 minutes after the beep. However, you can change the setting to reduce or extend this period.

Given the short period, recharge the solar inverter when you hear the beep. The device only needs several hours to charge fully; hence not much inconvenience as you wait.

The Cable Size is Wrong

If your inverter keeps beeping, confirm that its battery cable size is appropriate. In some instances, it is inadequate; in others, the cable is simply wrong.

Under such circumstances, the voltage drops, thus leading to the beeping sound. Ensure that you fix the issue as soon as it happens.

Thanks to its design, the inverter is fair enough to notify you that the cable has an issue with beeping. So, do what’s necessary, which is changing the battery cable in this case.

It is usually a great idea to seek the assistance of a professional to avoid making this mistake twice. Another recommendation is going for a long cable.

Change From Line to Battery Power

By default, it is the line that powers the solar inverter. Again, the equipment always ensures that you are notified about any change.

It will start beeping continuously when the inverter runs on the battery power. Under such circumstances, expect about 4 beeps within 30 seconds.

How Do I Stop My Solar Inverter from Beeping Continuously?

The answer depends on the cause of the beep. So, how you go about the issue is determined by why it is happening in the first place.

If you try a solution that fails, there are high chances the solar inverter beeps have nothing to do with the cause in mind. So, try another solution until you exhaust all the possible solutions.

If none works, don’t give up because all isn’t lost. It is advisable to take advantage of experienced electricians. After all, they understand the equipment better and have learnt a few things about it over the years.

Here is a summary of fixes that have worked whenever solar inverters wouldn’t stop beeping continuously;

  • Ensure that you replace the solar inverter battery whenever a need arises without any delay
  • Disconnect any unnecessary appliance or gadget to the solar inverter because the issue could have something to do with an overload
  • If all the gadgets and appliances are essential, consider upgrading your solar inverter with one that is powerful enough to handle their demands
  • In other instances, the solution can be as simple as recharging the solar inverter battery

However, there are times when there is nothing to worry about despite the solar inverter beeping. After all, there is no problem, which means a solution is also unnecessary.

An excellent example is a beep following a transfer of power running the inverter from the electricity grid to battery operation. In such a case, the beep serves as a notification, not a warning.

Why is My Solar Inverter Battery Refusing to Charge

One of the remedies when dealing with solar inverter beeps is charging its battery. However, you may notice that it is not charging.

The reasons and the solutions to the issue are as follows;

  • Loose connection to the battery following corrosion hence the need to clean its terminals to eliminate the rust, not forgetting to clamp them tightly and correctly
  • Burnt rectifiers, but professionals can fix it
  • Melted fuses, and the solution is as simple as replacing it